Summary If you configure a Windows-based computer that has more than one network adapter on the same physical network and protocol subnet, you may experience unexpected results. This article describes the expected behavior of this kind of nonstandard configuration. More Information Consider the following scenario: In this scenario, you may expect the two adapters on… Continue reading How multiple adapters on the same network are expected to behave
Author: Mena Awed
Factory resetting the bios for G-Series Micro
IMPORTANT: This article reflects G-Series Micros built prior to mid-2024. To factory reset the bios for G-Series Micro, you need to follow these steps:- 1-Unplug power cable from the Unit 2-Remove the 4x Phillips Chassis screws 3-Remove bottom and top cover 4-Remove the RAM stick 5-Plug in power cable (should turn on automatically), and Wait… Continue reading Factory resetting the bios for G-Series Micro
The camera is showing connected but not streaming videos
If the camera is connected to ExacqVision Server and showing connected on the add IP camera page but not streaming videos and showing acquiring video. That means the RTSP streaming port may need to be opened on the Firewall, normally 554
Exacq Software can’t connect to standalone S3 solution
when trying to connect to the S3 internal solution via the Exacq archiving page instead of the standard AWS S3 bucket the system couldn’t establish the connection to it. The standalone S3 solutions are not supported via Exacq Software and the only S3 solution that supported till server version 21.03 is the AWS S3 and… Continue reading Exacq Software can’t connect to standalone S3 solution