Input(): Unrecognized resolution. Description Server plugin does not like the resolution setting from the camera. Notes Enter camera web interface and change the resolution to match the IP Camera Integration test records.
Tag: Level2
tDVR %1 voltage %2
tDVR %1 voltage %2 Description %1 = the capture board number starting with 0. %BR%%2 = The processor voltage detected at startup, which varies. Notes This is a normal message.
tDVR %1 driver %2 bootloader %3
tDVR %1 driver %2 bootloader %3 Description %1 = the capture board number starting with 0. %BR%%2 = The version of firmware running. %BR%%3 = The bootloader version running on the card itself. Notes This is a normal message.
tDVR %1 video|audio %2 drop %3
tDVR %1 video|audio %2 drop %3 Description %1 = The number of capture card in the system starting with 0. %BR% %2 = The analog input channel starting with 0. %BR%%3 = The amount of frames dropped. %BR% This log tells how many frames of audio or video were dropped and which board channel it… Continue reading tDVR %1 video|audio %2 drop %3
Skipping, failed to load /mnt/edvr/%1/%2/%3/%4/%5/%6 – error opening file – -2
Skipping, failed to load /mnt/edvr/%1/%2/%3/%4/%5/%6 – error opening file – -2 Description %1 = Drive Number %BR%%2 = Year %BR%%3 = Month %BR%%4 = Day %BR%%5 = Hour %BR%%6 = File Name %BR%The archive job cannot find file specified, likely because it has been removed. Notes This can happen if there is a short retention… Continue reading Skipping, failed to load /mnt/edvr/%1/%2/%3/%4/%5/%6 – error opening file – -2
EBADRESP – 110
EBADRESP – 110 Description Invalid ping response. Notes This error occurs during xn_ping if an invalid response to a ping request is received. An invalid response is detected if the sequence number or the source IP address in the response is incorrect.
Input (%1) : Opening RTSP stream – %2.
Input (%1) : Opening RTSP stream – %2. Description %1 = the camera name or ip address. %BR% %2 = the URI stream requested from the device. This indicates that the video/audio stream has been requested from the device. Notes This is a normal message.
Hardware monitoring port address = %1
Hardware monitoring port address = %1 Description This is the communication port used to monitor the system’s hardware. Notes This is a normal message.
No controllers found
No controllers found Description No RAID controllers were found on the system Notes This is a normal message. Unless the system has a RAID controller.
Successful logout – %1 from address %2 (socket %3).
Successful logout – %1 from address %2 (socket %3). Description %1 = the user name used to connect to the Server. %BR% %2 = the IP address of the Client. %BR% %3 = the network socket used to connect. The Client was closed, or the system disabled. Notes This is a normal message.