IMPORTANT: This article reflects G-Series Micros built prior to mid-2024.
To factory reset the bios for G-Series Micro, you need to follow these steps:-
1-Unplug power cable from the Unit
2-Remove the 4x Phillips Chassis screws
3-Remove bottom and top cover
4-Remove the RAM stick
5-Plug in power cable (should turn on automatically), and Wait ~10 seconds
6-Unplug power cable
7-Assemble back the RAM stick
8-Carefully unplug the RTC Battery from the 2pin connector
9-Plug power cable (should turn on automatically)
10-Shutdown the PC
11-Unplug the power cable
12-Plug the RTC Battery back in
13-Plug Power cable
BIOS settings should be reset to defaults now