board *** watchdog expired
Description
The heartbeat communication to the capture board has timeout. The system will reboot.
Notes
Could be a hardware problem or anti-virus interference. Also possible if no page file is enabled.
Category: StretchPI
board *** get supported standards error ***
Description
Communication could not be established to the Stretch board.
Notes
Could be firmware or hardware related.
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED
Description
The Capture Board was not found.
Notes
This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
board 0 get config error SDVR_DRV_ERR_MSG_RECV
Description
An error message was received when the software tried to connect to the Capture Board.
Notes
This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
board 0 temperature is XX.X degrees C
Description
This is the temperature of the Capture Board.
Notes
This log will only show if the current temperature is above the Temperature Monitor Threshold set on the Device configuration page. The default threshold is 85.