Skipping, failed to load /mnt/edvr/%1/%2/%3/%4/%5/%6 – error opening file – -2 Description %1 = Drive Number %BR%%2 = Year %BR%%3 = Month %BR%%4 = Day %BR%%5 = Hour %BR%%6 = File Name %BR%The archive job cannot find file specified, likely because it has been removed. Notes This can happen if there is a short retention… Continue reading Skipping, failed to load /mnt/edvr/%1/%2/%3/%4/%5/%6 – error opening file – -2
Category: Logs
EBADRESP – 110
EBADRESP – 110 Description Invalid ping response. Notes This error occurs during xn_ping if an invalid response to a ping request is received. An invalid response is detected if the sequence number or the source IP address in the response is incorrect.
Input (%1) : Opening RTSP stream – %2.
Input (%1) : Opening RTSP stream – %2. Description %1 = the camera name or ip address. %BR% %2 = the URI stream requested from the device. This indicates that the video/audio stream has been requested from the device. Notes This is a normal message.
Hardware monitoring port address = %1
Hardware monitoring port address = %1 Description This is the communication port used to monitor the system’s hardware. Notes This is a normal message.
No controllers found
No controllers found Description No RAID controllers were found on the system Notes This is a normal message. Unless the system has a RAID controller.
Successful logout – %1 from address %2 (socket %3).
Successful logout – %1 from address %2 (socket %3). Description %1 = the user name used to connect to the Server. %BR% %2 = the IP address of the Client. %BR% %3 = the network socket used to connect. The Client was closed, or the system disabled. Notes This is a normal message.
Successful re-auth|re-authorization – %1 from address %2 (socket %3).
Successful re-auth|re-authorization – %1 from address %2 (socket %3). Description %1 = the user name used to connect to the Server. %BR% %2 = the IP address of the Client. %BR% %3 = the network socket used to connect.%BR% The credentials were re-verified. Notes This is a normal message.
Successful login – %1 from address %2 (socket %3).
Successful login – %1 from address %2 (socket %3). Description %1 = the user name used to connect to the Server. %BR% %2 = the IP address of the Client. %BR% %3 = the network socket used to connect. %BR% The credentials were verified. Notes This is a normal message.
Successfully attached client %1.
Successfully attached client %1. Description %1 = the IP address of the Client. %BR% The key exchange was successful and the user was authenticated. This Client is now connected to the Server. Notes This is a normal message.
NIC Teaming is not supported
NIC Teaming is not supported Description A supported NIC driver was not found and we cannot issue commands to enable NIC teaming. Notes This is a normal message.