Client 10.0.6.77:44976 disconnected.
Description
A Client has unchecked this Server on the “Add Systems” page.
Notes
This is a normal message.
Category: Logs
Made system available as a peer time server.
Description
The Server successfully enabled the local machine as an NTP server.
Notes
This is a normal message.
Purging log file YYYYMMDD.txt.
Description
This means that an old Log File has been deleted. Logs are retained up to the “Maximum Days Storage” setting on the “System Log” page.
Notes
If the OS drive is dangerously full, you may see many log files purged quickly to try to make space.
DiscoveryInprogress State. Unexpected event. Cable Plugged in on MAC %1
Description
%1 = The MAC address of the Nic.%BR%
This means a camera was plugged in to one of the POE ports.
Notes
This is normal on the Una and M-Series.
Idle State. Cable Plugged out on MAC %1
Description
%1 = MAC Address This indicates that a camera was disconnected from a POE port.
Notes
This is normally seen on the Una or M-Series.
%1: Valid WDR level is %2
Description
%1 = IP address of Camera %BR% %2 = WDR setting – normally 1-10
Notes
This indicates what Wide Dynamic Range a camera is capable, or what level the plugin is set the camera to.
Closed {File Page}
Description
This indicates that a 5-minute segment of video/audio has been recorded and the file closed.
Notes
This is a normal message.
Opened {File Path}
Description
This indicates that a record stream has been opened on the storage volume for video/audio.
Notes
This is a normal message.
%1 will be using VMD4 for Motion Events
Description
%1 = IP Address of camera. Indicates that VMD4 is being used for motion event detection.
Notes
This is a normal message.
%1 send error 110
Description
%1 = IP address of camera.110 is a Linux C Error code “ETIMEDOUT 110 /* Connection timed out */”
Notes
This occurs on the send side of the data rather than the receive side, which is why it is a send error.