Failed to resolve database location. Description The PosPI database could not be located. Notes The *.db files should be in the Server folder.
Category: Logs
Critical Error setting up command socket. Couldn’t bind address [-]
Critical Error setting up command socket. Couldn’t bind address [-] Description The IPCamDetectPI error is one that occasionally happens due to some handle inheritance on restarting. I think most lately it’s been in conjunction with remote updates. Worst case, the workaround is a reboot
Failed to resolve database location.
Failed to resolve database location. Description The EventPI database could not be located. Notes The *.db files should be in the Server folder.
Failed database operation:
Failed database operation: Description The EventPI database may be corrupt. Notes There should be other related logs with additional information about what happened.
QueryMACAddresses – retcode PHYSICAL_IF_IOCTL_OPENERROR
QueryMACAddresses – retcode PHYSICAL_IF_IOCTL_OPENERROR Description The Engineering team has not fully understood why this error occurs. We may be issuing commands to a get MAC address and link speed to virtual adapters where they are not supported. But if the customer is able to see all attached network interfaces and their MAC addresses in the… Continue reading QueryMACAddresses – retcode PHYSICAL_IF_IOCTL_OPENERROR
Error receiving *** detection datagram.
Error receiving *** detection datagram. Description The Camera Finder communicated with a device it thought was a camera, but did not receive the proper information datagram back. So it’s likely not a camera. Notes Either it wasn’t a camera, or anti-virus interference.
Registry Key %1 missing or no member adapters to report
Registry Key %1 missing or no member adapters to report Description %1 = The registry key queried. %BR% Teaming is not setup on the system or teaming is not supported
*** Socket receive timeout ***.
*** Socket receive timeout ***. Description Communication dropped to device. Notes Likely network related.
Error Failed to get Characteristics registry value
Error Failed to get Characteristics registry value Description When we enumerate network adapters from the registry, we look at the values of the “\Characteristics\” key to determine whether an adapter is physical or virtual. There is one adapter which does not have this key and that is almost always at index 0. Notes This error… Continue reading Error Failed to get Characteristics registry value
UpdatePI sending status: (NO_UPDATE)
UpdatePI sending status: (NO_UPDATE) Description Remote Update did not find a newer version available. Notes This is a normal message.