Failed call to GetAdaptersInfo in buffer 0E897B98. Return Code=998 Description Windows Socket Leak. Notes Windows Socket Leak. See the following Microsoft KB http://support.microsoft.com/kb/2577795
Category: Logs
Error -10057 (RTSP PLAY: Bad \”Range:\” header).
Error -10057 (RTSP PLAY: Bad \”Range:\” header). Description Camera has stopped sending data. Notes Stream Timeout normally precedes this error. Error -10057 (RTSP PLAY: Bad “Range:” header) is the same error as Stream Timeout. This is a different component calling out the same error.
LDAP_Simple_Bind failed: Strong Authentication Required
LDAP_Simple_Bind failed: Strong Authentication Required Description When the GPO “Domain Controller:LDAP Server Signing Requirement” is set to “require signing”, it will reject a simple bind unless using SSL. GPO or local policy object is located at Computer Configuration, Policies, Windows Settings, Security Settings, Local Policies, and then click Security Options.
*** socket error 113
*** socket error 113 Description No route to host. Destination unreachable (ICMP). This error occurs when an ICMP destination unreachable packet for the socket is received. Notes Likely to be a Linux server. There is a network problem of some kind.
Could not find iscsi initiator service: open-iscsi.
Could not find iscsi initiator service: open-iscsi. Description On a Linux machine, this indicates that the package “open-iscsi” is not installed. Since our software uses this to initiate iSCSI connections, the Extended tab will be missing from the Storage configuration page.See https://support.exacq.com/#/knowledge-base/article/3060
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED Description The Capture Board was not found. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
board 0 get config error SDVR_DRV_ERR_MSG_RECV
board 0 get config error SDVR_DRV_ERR_MSG_RECV Description An error message was received when the software tried to connect to the Capture Board. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
The device denied the configuration request due to an authentication error. Please make sure the correct credentials have been entered.
The device denied the configuration request due to an authentication error. Please make sure the correct credentials have been entered. Description Bad username/password. Notes
3Ware|storcli executable not found. Disabling the feature
3Ware|storcli executable not found. Disabling the feature Notes Not a problem for systems without a RAID controller card.
camera detection is not available.
camera detection is not available. Description This could be caused by detection socket being used. Such as port 1900(UPnP) or 3702(ws-discovery) are being used by another application(use netstat) or mDNSResponder.exe is missing from the path. Notes If Onvif discovery failed in Windows environment, check to see if “Function Discovery Provider Host” and/or “Function Discovery Resource… Continue reading camera detection is not available.