board 0 temperature is XX.X degrees C Description This is the temperature of the Capture Board. Notes This log will only show if the current temperature is above the Temperature Monitor Threshold set on the Device configuration page. The default threshold is 85.
Category: Warning
A device configuration change requires a device reboot…
A device configuration change requires a device reboot… Description The camera/device is rebooting. Notes
Core – Warning system time changed by -*** seconds
Core – Warning system time changed by -*** seconds Description The system time has been changed either by user interaction, or by NTP adjustment. Notes If the adjustment is more than 1 second and was not initiated by user interaction, verify that the Server has consistent connection to its NTP server. If the NTP server… Continue reading Core – Warning system time changed by -*** seconds
remove D:\\YYYY\\MM\\DD\\HH\\XXXX-XXXXXXXX.ps error
remove D:\YYYY\MM\DD\HH\XXXX-XXXXXXXX.ps error Description The Server tried to remove a previously recorded file and could not. Notes This can occur if the file has manually been deleted, or if another software (anti-virus) has currently locked the file. Also, if a hard drive has been remounted as read-only, the file removal will fail.
Client %1:%2 disconnected on receive (WSAECONNABORTED).
Client %1:%2 disconnected on receive (WSAECONNABORTED). Description %1 = Client machine IP address. %BR% %2 = Port number Client used to connect. %BR% This Windows Socket Error indicates that the Server-Client connection was aborted. Notes This indicates that the network connection between the Server and Client was aborted. This can be due to a congested… Continue reading Client %1:%2 disconnected on receive (WSAECONNABORTED).
Client %1:%2 (Port) disconnected on receive (WSAECONNRESET).
Client %1:%2 (Port) disconnected on receive (WSAECONNRESET). Description %1 = Client machine IP address. %BR% %2 = Port number Client used to connect. %BR% This Windows Socket Error indicates that the Server-Client connection was forcibly closed by the remote host. Notes This indicates that the network connection between the Server and Client was cut off… Continue reading Client %1:%2 (Port) disconnected on receive (WSAECONNRESET).
Registry Key %1 missing or no member adapters to report
Registry Key %1 missing or no member adapters to report Description %1 = The registry key queried. %BR% Teaming is not setup on the system or teaming is not supported
Request was denied by the device. Make sure the correct credentials have been entered.
Request was denied by the device. Make sure the correct credentials have been entered. Description Bad username/password. Notes
Discarding frame of excessive length ***
Discarding frame of excessive length *** Description A frame received, exceeded the available buffer space for the camera plugin. Notes The buffer for individual plugins has changed over time. Check the release notes. It’s possible the customer may need to update to a newer version of Server to support a newer camera with larger frames.… Continue reading Discarding frame of excessive length ***
Transform failure on send ***
Transform failure on send *** Description Communication failure while sending config information to a Client. Notes Can be due to a corrupted installation or anti-virus. <br>