Category: Log Level

Categories
Knowledge Support Exclude from Global Search Log Level Warning Support exacqVision Server Categories Products Logs IpCamDetectPI

Due to errors, %1 cameras cannot be detected.

Due to errors, %1 cameras cannot be detected.

Description

%1 = Name of Camera Manufacturer %BR%
This could be caused by detection socket being used. Such as port 1900(UPnP) or 3702(ws-discovery) are being used by another application(use netstat) or mDNSResponder.exe is missing from the path.

Notes

If Onvif discovery failed in Windows environment, check to see if “Function Discovery Provider Host” and/or “Function Discovery Resource Publication” services are running. These two services also use port 3702 and will cause IPCamDetect to fail.

Categories
Exclude from Global Search Knowledge Support Log Level Verbose Support exacqVision Server Categories Products Logs StreamPI

Client %1:%2 unsubscribed from stream %3

Client %1:%2 unsubscribed from stream %3

Description

%1 = The IP address of the Client machine. %BR%
%2 = The port number the Client connected through. %BR%
%3 = The Device ID for the stream displayed. %BR%
User stopped viewing a camera from Client machine.

Notes

This is a normal message
Categories
Exclude from Global Search Knowledge Support Log Level Verbose Support exacqVision Server Categories Products Logs StreamPI

Client %1:%2 subscribed to stream %3

Client %1:%2 subscribed to stream %3

Description

%1 = The IP address of the Client machine. %BR%
%2 = The port number the Client connected through. %BR%
%3 = The Device ID for the stream displayed. %BR%

User is viewing a camera from Client machine.

Notes

This is a normal message

Categories
Exclude from Global Search Knowledge Support Log Level Support Error exacqVision Server Categories Products Logs ExportPI

Error in executing media test (*** query) for status refresh (error ***)

Error in executing media test (*** query) for status refresh (error ***)

Description

Indicates there is no media in the Servers DVD/CD drive.

Notes

This message will come up on service start, and if you hit Refresh Status in the Exacq Recall page.
This is a normal message if there is no disk in the drive.

Categories
Exclude from Global Search Knowledge Support Log Level Support Warning AxisPI exacqVision Server Categories Products Logs

*XXX buffer full state = 0 content true

*XXX buffer full state = 0 content true

Description

Unable to buffer larger than 2MB image size. Older version of Server (pre 8.2) had a smaller buffer for video frames.

Notes

Update beyond 8.2, or reduce either the quality or record resolution.

Categories
Exclude from Global Search Plugin Log Level Warning exacqVision Server AxisPI Categories Products Logs

%1 unexpected marker 0x01 at offset %2 in SEI data

%1 unexpected marker 0x01 at offset %2 in SEI data

Description

This means that the data in the stream header is inconsistent. Probably due to network traffic problems and packet loss. The user data can include time stamp and motion information%BR%%BR%

%1 – camera name%BR%

%2 – offset number%BR%