board 0 get config error SDVR_DRV_ERR_MSG_RECV Description An error message was received when the software tried to connect to the Capture Board. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
Category: Log Level
The device denied the configuration request due to an authentication error. Please make sure the correct credentials have been entered.
The device denied the configuration request due to an authentication error. Please make sure the correct credentials have been entered. Description Bad username/password. Notes
3Ware|storcli executable not found. Disabling the feature
3Ware|storcli executable not found. Disabling the feature Notes Not a problem for systems without a RAID controller card.
camera detection is not available.
camera detection is not available. Description This could be caused by detection socket being used. Such as port 1900(UPnP) or 3702(ws-discovery) are being used by another application(use netstat) or mDNSResponder.exe is missing from the path. Notes If Onvif discovery failed in Windows environment, check to see if “Function Discovery Provider Host” and/or “Function Discovery Resource… Continue reading camera detection is not available.
board 0 temperature is XX.X degrees C
board 0 temperature is XX.X degrees C Description This is the temperature of the Capture Board. Notes This log will only show if the current temperature is above the Temperature Monitor Threshold set on the Device configuration page. The default threshold is 85.
*** – The device returned a corrupted XML. or *** – Corrupted xml received from device. Cannot parse response status.
*** – The device returned a corrupted XML. or *** – Corrupted xml received from device. Cannot parse response status. Description The camera/device is not responding with the expected configuration capabilities. Notes If camera is supported, factory default.
Profile Description: %1 , Result: *** DD HH:MM:SS %2 sendEmail.exe[***]: Email was sent successfully!
Profile description: %1 , Result: * DD HH:MM:SS %2 sendEmail.exe[*]: Email was sent successfully! Description %1 = Notification Profile name. %BR% %2 = System name. %BR% The Notification Profile triggered and successfully sent an email. Notes Not a problem, unless this occurs way too often. If so, check the Event Linking “Event Type” which triggers… Continue reading Profile Description: %1 , Result: *** DD HH:MM:SS %2 sendEmail.exe[***]: Email was sent successfully!
A device configuration change requires a device reboot…
A device configuration change requires a device reboot… Description The camera/device is rebooting. Notes
Core – Warning system time changed by -*** seconds
Core – Warning system time changed by -*** seconds Description The system time has been changed either by user interaction, or by NTP adjustment. Notes If the adjustment is more than 1 second and was not initiated by user interaction, verify that the Server has consistent connection to its NTP server. If the NTP server… Continue reading Core – Warning system time changed by -*** seconds
remove D:\\YYYY\\MM\\DD\\HH\\XXXX-XXXXXXXX.ps error
remove D:\YYYY\MM\DD\HH\XXXX-XXXXXXXX.ps error Description The Server tried to remove a previously recorded file and could not. Notes This can occur if the file has manually been deleted, or if another software (anti-virus) has currently locked the file. Also, if a hard drive has been remounted as read-only, the file removal will fail.