Error -10057 (RTSP PLAY: Bad \”Range:\” header). Description Camera has stopped sending data. Notes Stream Timeout normally precedes this error. Error -10057 (RTSP PLAY: Bad “Range:” header) is the same error as Stream Timeout. This is a different component calling out the same error.
Category: Error
*** socket error 113
*** socket error 113 Description No route to host. Destination unreachable (ICMP). This error occurs when an ICMP destination unreachable packet for the socket is received. Notes Likely to be a Linux server. There is a network problem of some kind.
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED Description The Capture Board was not found. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
board 0 get config error SDVR_DRV_ERR_MSG_RECV
board 0 get config error SDVR_DRV_ERR_MSG_RECV Description An error message was received when the software tried to connect to the Capture Board. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
*** – The device returned a corrupted XML. or *** – Corrupted xml received from device. Cannot parse response status.
*** – The device returned a corrupted XML. or *** – Corrupted xml received from device. Cannot parse response status. Description The camera/device is not responding with the expected configuration capabilities. Notes If camera is supported, factory default.
Ignoring request – cannot locate valid export devices.
Ignoring request – cannot locate valid export devices. Description No usable location was found for exporting data. Notes Could be related to drive permissions, or anti-virus.
Failed to burn media –
Failed to burn media – Description Burn to disc failed. See the additional error info. Notes May have been a bad CD/DVD, or CD/DVD drive.
Failed to resolve database location.
Failed to resolve database location. Description The PosPI database could not be located. Notes The *.db files should be in the Server folder.
Critical Error setting up command socket. Couldn’t bind address [-]
Critical Error setting up command socket. Couldn’t bind address [-] Description The IPCamDetectPI error is one that occasionally happens due to some handle inheritance on restarting. I think most lately it’s been in conjunction with remote updates. Worst case, the workaround is a reboot
Failed to resolve database location.
Failed to resolve database location. Description The EventPI database could not be located. Notes The *.db files should be in the Server folder.