Client %1:%2 disconnected on receive (WSAECONNABORTED). Description %1 = Client machine IP address. %BR% %2 = Port number Client used to connect. %BR% This Windows Socket Error indicates that the Server-Client connection was aborted. Notes This indicates that the network connection between the Server and Client was aborted. This can be due to a congested… Continue reading Client %1:%2 disconnected on receive (WSAECONNABORTED).
Author: Lauren McTeague
Client %1:%2 (Port) disconnected on receive (WSAECONNRESET).
Client %1:%2 (Port) disconnected on receive (WSAECONNRESET). Description %1 = Client machine IP address. %BR% %2 = Port number Client used to connect. %BR% This Windows Socket Error indicates that the Server-Client connection was forcibly closed by the remote host. Notes This indicates that the network connection between the Server and Client was cut off… Continue reading Client %1:%2 (Port) disconnected on receive (WSAECONNRESET).
Critical Error setting up command socket. Couldn’t bind address [-]
Critical Error setting up command socket. Couldn’t bind address [-] Description The IPCamDetectPI error is one that occasionally happens due to some handle inheritance on restarting. I think most lately it’s been in conjunction with remote updates. Worst case, the workaround is a reboot
QueryMACAddresses – retcode PHYSICAL_IF_IOCTL_OPENERROR
QueryMACAddresses – retcode PHYSICAL_IF_IOCTL_OPENERROR Description The Engineering team has not fully understood why this error occurs. We may be issuing commands to a get MAC address and link speed to virtual adapters where they are not supported. But if the customer is able to see all attached network interfaces and their MAC addresses in the… Continue reading QueryMACAddresses – retcode PHYSICAL_IF_IOCTL_OPENERROR
Registry Key %1 missing or no member adapters to report
Registry Key %1 missing or no member adapters to report Description %1 = The registry key queried. %BR% Teaming is not setup on the system or teaming is not supported
Error Failed to get Characteristics registry value
Error Failed to get Characteristics registry value Description When we enumerate network adapters from the registry, we look at the values of the “\Characteristics\” key to determine whether an adapter is physical or virtual. There is one adapter which does not have this key and that is almost always at index 0. Notes This error… Continue reading Error Failed to get Characteristics registry value
UpdatePI sending status: (NO_UPDATE)
UpdatePI sending status: (NO_UPDATE) Description Remote Update did not find a newer version available. Notes This is a normal message.
UpdatePI Worker Thread started.
UpdatePI Worker Thread started. Description Remote update initiated. Notes This is a normal message.
| Time | Device | SMART ID | Value | Threshold |
| Time | Device | SMART ID | Value | Threshold | Description This is a header line to show the values for the following SMART response lines. Notes This is a normal message.
profile *** does not exist
profile *** does not exist Description A previously created Event Linking entry may have attempted to call a POS profile that has been removed.