LDAP_Simple_Bind failed: Strong Authentication Required Description When the GPO “Domain Controller:LDAP Server Signing Requirement” is set to “require signing”, it will reject a simple bind unless using SSL. GPO or local policy object is located at Computer Configuration, Policies, Windows Settings, Security Settings, Local Policies, and then click Security Options.
Author: Lauren McTeague
*** socket error 113
*** socket error 113 Description No route to host. Destination unreachable (ICMP). This error occurs when an ICMP destination unreachable packet for the socket is received. Notes Likely to be a Linux server. There is a network problem of some kind.
Could not find iscsi initiator service: open-iscsi.
Could not find iscsi initiator service: open-iscsi. Description On a Linux machine, this indicates that the package “open-iscsi” is not installed. Since our software uses this to initiate iSCSI connections, the Extended tab will be missing from the Storage configuration page.See https://support.exacq.com/#/knowledge-base/article/3060
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED
board 0 set date time error SDVR_ERR_BOARD_NOT_CONNECTED Description The Capture Board was not found. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
board 0 get config error SDVR_DRV_ERR_MSG_RECV
board 0 get config error SDVR_DRV_ERR_MSG_RECV Description An error message was received when the software tried to connect to the Capture Board. Notes This can be a problem with the Capture Board driver, the PCI slot, or the physical Board itself.
3Ware|storcli executable not found. Disabling the feature
3Ware|storcli executable not found. Disabling the feature Notes Not a problem for systems without a RAID controller card.
board 0 temperature is XX.X degrees C
board 0 temperature is XX.X degrees C Description This is the temperature of the Capture Board. Notes This log will only show if the current temperature is above the Temperature Monitor Threshold set on the Device configuration page. The default threshold is 85.
Profile Description: %1 , Result: *** DD HH:MM:SS %2 sendEmail.exe[***]: Email was sent successfully!
Profile description: %1 , Result: * DD HH:MM:SS %2 sendEmail.exe[*]: Email was sent successfully! Description %1 = Notification Profile name. %BR% %2 = System name. %BR% The Notification Profile triggered and successfully sent an email. Notes Not a problem, unless this occurs way too often. If so, check the Event Linking “Event Type” which triggers… Continue reading Profile Description: %1 , Result: *** DD HH:MM:SS %2 sendEmail.exe[***]: Email was sent successfully!
Core – Warning system time changed by -*** seconds
Core – Warning system time changed by -*** seconds Description The system time has been changed either by user interaction, or by NTP adjustment. Notes If the adjustment is more than 1 second and was not initiated by user interaction, verify that the Server has consistent connection to its NTP server. If the NTP server… Continue reading Core – Warning system time changed by -*** seconds
remove D:\\YYYY\\MM\\DD\\HH\\XXXX-XXXXXXXX.ps error
remove D:\YYYY\MM\DD\HH\XXXX-XXXXXXXX.ps error Description The Server tried to remove a previously recorded file and could not. Notes This can occur if the file has manually been deleted, or if another software (anti-virus) has currently locked the file. Also, if a hard drive has been remounted as read-only, the file removal will fail.