garethhowell – Page 3

Successfully updated license key.

Successfully updated license key. Description Notes This is a normal message.

Replacing default serial number with MAC address %1.

Replacing default serial number with MAC address %1. Description %1 – The MAC address of the Server. %BR% If the streampi config is corrupted or not found, a default config is loaded. In this case, the serial number is changed to the server’s MAC address. Notes

LDAP: Lost binding to server.

LDAP: Lost binding to server. Description Communication has dropped to the Active Directory/LDAP server. Notes

Client *** disconnected due to key exchange timeout.

Client *** disconnected due to key exchange timeout. Description The remote client did not respond to the key exchange. Notes Server-Client keys are exchanged every 5 minutes.

Receive error buffer full

Receive error buffer full Description The available memory buffer if full for the data being received. Notes In some cases, a camera can send a frame larger than our allowable frame buffer. Lowering the image quality may help.

* received sequence * expected ***

*** received sequence *** expected *** Description Data packets from the camera/device are being received out of sequence. Notes May be a network congestion.

Powershell version 2.0 or greater required

Powershell version 2.0 or greater required Description On a Windows machine, the Archiving plugin uses Powershell for iSCSI integration. Powershell is either not installed or is an older version. Notes If able, install the Windows Management Framework, then restart the Server service. https://support.microsoft.com/en-us/kb/968929

device * board init error *

device *** board init error *** Description Communication could not be established to the eDVR board. Notes May be firmware or hardware related.

Input #: Unsupported codec.

Input #: Unsupported codec. Description The camera is currently streaming in a codec that cannot be received. Notes Change the stream codec to one supported or factory default the camera.The IP8162 may set codec to “SVC” after a factory default. The camera doesn’t even support this stream. You must change the stream profile back to… Continue reading Input #: Unsupported codec.

board * get supported standards error *

board *** get supported standards error *** Description Communication could not be established to the Stretch board. Notes Could be firmware or hardware related.