This video will walk you through connecting a Kantech KT-1 controller using an ioSmart Reader to Cloudvue. Be sure you have followed the steps in a separate video on configuring the KT-1 Controller for Cloudvue Mode before proceeding.
- After connecting your ioSmart Reader to the KT-1 controller, connect the system to your network to communicate with Cloudvue.
- Add the ioSmart Reader to the account before adding the KT-1 controller.
- Press the Account button, then choose the Devices tab.
- Click the Add New Device button and select Add Mobile Access Device.
- Enter a Name.
- Enter the Serial Number, located on the back of the reader, followed by a dash and the confirmation code, also on the back of the reader.
Example: 123A456B-CD78 - Select Function Mode. Choose Panel Based (Mobile Credential Reader) when using with a controller, such as the KT-1.
- Panelless installations of ioSmart Readers do not have controllers, such as the KT-1, they are standalone readers.
- Select the Location.
- Save changes.
- Add the KT-1 Controller. Return to the Devices tab and press the Add New Device button, then select Add Access Control Device.
- With the controller added, enter the controller’s settings to associate the ioSmart Reader with the controller. From the settings page, select the Readers tab.
- Check the Mobile Credentials box, allowing uses to use the Cloudvue Access mobile app as well as cards and fobs.
- Use the drop-down selector beside the ioSmart Serial number field to select the previously configured ioSmart Reader.
- Click Save.
<br>
