*** stream stalled
Description
The video/audio stream timed out.
Month: July 2022
H.264|MPEG-4 GOV length is %
Description
GOV (Group of Video) is the I-frame interval for the video stream.
Notes
This is a normal message.
*** not connected
Description
An IP device has been disabled.
Notes
This is a normal message.
*** receiving video
Description
A connected camera is streaming video successfully.
Notes
This is a normal message.
Failed to poll socket read/write status – WSAEFAULT. Failed to poll socket read/write status – WSAENOTSOCK
Description
In exacqVision Server 6.7.30, 6.7.31, and 6.8.1, the server will become unusable and the system might enter a reboot cycle if 63 or more clients are connected to the server at the same time. The server will log numerous instances this message.
Notes
Failed call to GetAdaptersInfo in buffer ***
Description
Windows only, If the buffer’s address is greater than 0x8000000, the server could have a bug in the Windows internal address conversion routines.
Notes
*** EISCONN – 120 ***
Description
Socket is already connected.
Notes
This error is detected when a connect or listen call is made for a socket which is already connected or listening.
Request was denied by the device. Make sure the correct credentials have been entered
Description
With Axis firmware 5.70 and later with encryption mode enabled, an Axis device could take up to five minutes (the default setting for IP reconnection in exacqVision) to start streaming.
Notes
Workaround: Wait for the IP reconnection period to elapse before connecting, or reduce the IP Reconnection setting to a shorter period on the exacqVision System page (Network tab).
*** EDESTUNREACH – 113 ***
Description
Destination unreachable (ICMP).
Notes
This error occurs when an ICMP destination unreachable packet for the socket is received.
*** ECONNREFUSED – 111 ***
Description
Connection refused.
Notes
This error can occur during an attempt to connect a TCP socket. It is reported when a reset or an unexpected SYNC message is received.