Month: May 2019

Categories
Knowledge Support Support Categories Products exacqVision Integrations

Configuring Samsung|Hanwha Camera Edge Storage for Use with Server “Network Loss Recording” Feature

Steps to configure Edge Storage (SD card) recording on the camera web page:

NOTE: ‘HTTP’ protocol must be used when adding the camera.

  1. Setup and format SD media from the camera setup web page (Event/Storage)
  2. SD card can be formatted to either vfat or ext4
  3. Setup the primary recording profile to the encoding format you want (Basic/Video Profile)
  4. Recording format on Event/Storage page will automatically reflect the primary profile format from the earlier setup.
  5. Record on event can then be set in the “Event Setup” tab for motion or any analytic event on record.
  6. Recorded video may then be reviewed from the playback tab.

Verification

  1. The SD card may be examined to confirm the camera populates recordings locally.
  2. To confirm or test the “Network Loss Recording” function, a network disconnection that does not cause the camera itself to lose power will need to be simulated. When the camera connection is re-established, the server will indicate entries in the server logs and begin to copy the video files from the camera.